Contact NowHigh Current Rectifier (HCR)｜power Supply Rectification KHSA-25KA12V-2 SCR Thyristor Controlled with Reverse Function and Cophase Counter Parallel Connection Rectification for Surface TreatmentHigh Current Rectifier (HCR) Mode type：KHSA-25KA12V-2 Input：AC415V, 3 phase，frequency: 50Hz Output：0-25000A 0-12V ▲ Adopted cophase counter parallel connection Rectification，wihich can increase the power factor and reduce power loss ▲ Three-phase bridge rectification,which has the characteristics of reliability,stability,and low losses ▲ Adopted aluminum frame and glass antimagnetic cabinet, which suit for monitor and maintenance ▲ Power is scalable ▲ Can be maintained with electricity. ▲ With Low noise ▲ Easy to operate ▲ Superiority of Ture Rdundancy techniqueRead More
Contact NowIndustrial Rectifier System｜rectifier Diode Power Loss ZHS-70000A/1500V for Aluminum FoilHigh Current Rectifier（HCR） Mode type：ZHS-70000A/1500V Input：AC415V, 3 phase，frequency: 50Hz Output：70000A 1500V——Structure overview: The control cabinet is of GGD closed structure and opposed access door at the front and back for operation and maintenance. The gauge, control switch and potentiometer are installed front door plank of the cabinet; the signal light is installed on the top panel in the front of the cabinet and the entrance hole is set at the bottom of the cabinet for user connection. See Figure (II) for its appearance and installation dimensions.Read More
Contact NowHigh Current Regulator｜power Supply Transformer Rectifier ZHS-45000A/670V for ElectrochemicalHigh Current Rectifier（HCR） Mode type：ZHS-45000A/670V Input：AC415V, 3 phase，frequency: 50Hz Output：45000A 670V——It applies to large-current DC power supply in the electrolytics industry and metal industry and can be used as power supply for aluminum, magnesium, zinc, manganese and lead electrolysis, DC electric arc furnace melting, salt electrolysis, water electrolysis, graphitization furnace and silicon carbide and the power supply of similar load nature.Read More
Contact NowHigh Current Rectifier (HCR)｜HIGH POWER RECTIFIER SYSTEMS KHS-18000A/230V with Local and Remotely Control Panel SCR Thyristor Phase Controlled Rectifier for Salt ElectrolysisHIGH POWER RECTIFIER SYSTEMS｜High Current Rectifier（HCR） Mode type：KHS-18000A/230V Input：AC380V-330KV, 3 phase，frequency: 50Hz Output：18000A 230V —— We are a company specializing in the production of more than 10KW Ultra Power,High Current Rectifier (HCR) for nearly 20 years, and concentrating on non-standard high current rectifier according to the customer’s parameters. We also deal in rectifier devices.Read More
Contact NowHigh Current Rectifier (HCR)｜DC Power Rectifier KHS-20000A/680V with Fully Adjustable Over Entire Range for Water TreatmentHigh Current Rectifier（HCR） Mode type：ZHS-20000A/680V Input：AC300V-330KV, 3 phase，frequency: 40-60Hz Output：20000A 6802V——The main parameters of our Thyristor / Diode High Current Rectifiers for Industrial Applications: A）Voltage Specification: 5V - 3000V B) Current Specification: 300A - 240000A C) Output Current Adjusting Range： 0 - 1000ARead More
Contact NowHigh Current Rectifier (HCR)｜Industrial High Power Rectifier KHS-20000A/680V SCR Thyristor Controlled with Double Reverse Star 6 Pulse Wave Rectifying for Ionic MembraneHigh Current Rectifier（HCR） Mode type：KHS-20000A/680V Input：AC380V-330KV, 3 phase，frequency: 40-60Hz Output：DC20000A，DC680V ▲ Adopted cophase counter parallel connection Rectification，wihich can increase the power factor and reduce power loss ▲ Three-phase bridge rectification,which has the characteristics of reliability,stability,and low losses ▲ Adopted aluminum frame and glass antimagnetic cabinet, which suit for monitor and maintenance ▲ Power is scalable ▲ Can be maintained with electricity. ▲ With Low noise ▲ Easy to operate ▲ Superiority of Ture Rdundancy techniqueRead More
Contact NowHigh Current Rectifier (HCR)｜high Power Rectification KHS-18KA40V SCR Thyristor Controlled Three Phase Bridge Type with PLC HMI Function for Electrolytic Refining CopperHigh Current Rectifier（HCR） Mode type： KHS-18KA40V Input：AC380V-400V, 3 phase，frequency:50Hz Output：0-18000A 0-40V ——The expert teams with 20 years experience can supply equipment design,manufacture, upgrading and after sales service. It’s quality management system meets the requirement of the ISO9001:2008 standard. The Technical level of main equpment is ten years ahead in China,and the control system is twenty years ahead at home and abroad.Read More
Contact NowHigh Current Rectifier (HCR)｜High Power Rectiformer KHS-18000A/550V SCR Thyristor Controlled with Fan Air Cooling for Graphitization FurnaceHigh Current Rectifier（HCR） Mode type：KHS-18000A/550V Input：AC380V-330KV, 3 phase，frequency: 40-600Hz Output：18000A 550V——Our products of High Current Rectifier (HRC) are customized according to clients’s parameters.They are used in variety of applications as follows: 1.Plating: Chrome, Zine, Nickel, Copper, Gold, Silver 2.Metal smelting: Aluminum, Copper, Zine, Lead, Manganese, Magnesium, etc. 3.Ionic membrane: Electrolysis of salt, etc 4.Silicon carbide smelting & Graphitization furnace 5.Experimental power supply 6.Copper foil, aluminum foil special power supply 7.Electrochemical: Chlor-alkali, etc 8.Electrolysis: Copper, Zine, Tin, Lead, Aluminum foil, Copper foilRead More
Contact NowIndustrial Rectifier｜power Supply High Current ZHS-70000A/1500V for Aluminum FoilHigh Current Rectifier（HCR） Mode type：ZHS70000A/1500V Input：AC415V, 3 phase，frequency: 50Hz Output：70000A 1500V——It applies to large-current DC power supply in the electrolytics industry and metal industry and can be used as power supply for aluminum, magnesium, zinc, manganese and lead electrolysis, DC electric arc furnace melting, salt electrolysis, water electrolysis, graphitization furnace and silicon carbide and the power supply of similar load nature.Read More
Contact NowIndustrial DC Power Supply｜high Current Schottky Rectifier Diode ZHS-240000A/200V Continuously Adjustable for Carbon SmeltingHigh Current Rectifier（HCR） Mode type：ZHS-240000A/200V Input：AC415V, 3 phase，frequency: 50Hz Output：240000A 200V——The expert teams with 20 years experience can supply equipment design,manufacture, upgrading and after sales service. It’s quality management system meets the requirement of the ISO9001:2008 standard. The Technical level of main equpment is ten years ahead in China,and the control system is twenty years ahead at home and abroad.Read More
